TL-SC3000
3GPP Surveillance Camera
5
2.2 Upper Side & Underside
Chapter 3. Installation
3.1 Install the Hardware
This camera can be installed in two ways: ceiling-mounted and desktop. During the installation, please
make sure the upper side of the camera is always facing up, as shown in Figure 1 below, regardless of
which installation way you’re using. This is to ensure the video output won’t be up side down.
)
Note:
¾
The illustrations below are based on the ceiling-mounted installation.
¾
For the detailed cable connection, please refer to the section “Rear Panel” on Page 4.
Tool needed: Power drill x 1 (not supplied within the sales package)
1.
Prepare all the parts needed for camera installation.
Find the network camera, bracket package, a bag of screws & wall plugs, and a cap supplied with
the sales package, as shown in Figure 3-1.
Unpack the bracket package to find the bracket disassembled into three parts: the base, stem
and joint lock.
