TL-R860
Cable/DSL Router User Guide
Figure 4-10 MAC Address Clone
Some ISPs require that you register the MAC address of your adapter, which is
connected to your cable, DSL modem or Ethernet during installation. You do not
generally need to change anything here.
¾
WAN MAC Address -
This field displays the current MAC address of the WAN port,
which is used for the WAN port. If your ISP requires that you register the MAC
address, please enter the correct MAC address into this field. The format for the
MAC address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).
¾
Your PC's MAC Address -
This field displays the MAC address of the PC that is
managing the router. If the MAC address is required, you can click the
Clone MAC
Address
button and this MAC address will fill in the
WAN MAC Address
field.
Click
Restore Factory MAC
to restore the MAC address of WAN port to the factory
default value.
Click the
Save
button to save your settings.
)
Note:
1) Only the PC(s) on your LAN can use the
MAC Address Clone
feature.
2) If you click the
Save
button, the router will prompt you to reboot.
4.5 DHCP
Figure 4-11 the DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-11):
DHCP
Settings
,
DHCP Clients List
and
Address Reservation.
Click any of them, and you will
be able to configure the corresponding function. The detailed explanations for each
submenu are provided below.
- 19 -