TL-R860
Cable/DSL Router User Guide
Figure 3-7 Quick Setup - PPPoE
¾
User Name and Password -
Enter the
User Name
and
Password
provided by your
ISP. These fields are case sensitive. If you have difficulty with this process, please
contact your ISP.
If you choose "
Dynamic IP
", the router will automatically receive the IP parameters from
your ISP without needing to enter any parameters.
If you Choose "
Static IP
", the Static IP settings page will appear, shown in Figure 3-8:
Figure 3-8 Quick Setup - Static IP
)
Note:
The IP parameters should have been provided by your ISP.
¾
IP Address -
This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
¾
Subnet Mask -
The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0
¾
Default Gateway -
Enter the gateway into the box if required.
¾
Primary
DNS -
Enter the DNS Server IP address into the boxes if required.
¾
Secondary DNS -
If your ISP provides another DNS server, enter it into this field.
Click the
Next
button, then you will see the Finish page:
Figure 3-9 Quick Setup - Finish
After finishing all configurations of basic network parameters, please click
Finish
button
to exit this
Quick Setup
.
- 10 -
