TL-R860
Cable/DSL Router User Guide
Figure 4-9 PPPoE Advanced Settings
¾
Packet MTU -
The default MTU size is 1480 bytes, which is usually fine. For some
ISPs, you need modify the MTU. This should not be done unless you are sure it is
necessary for your ISP.
¾
Service Name/AC Name -
The service name and AC (Access Concentrator) name,
this should not be done unless you are sure it is necessary for your ISP.
¾
ISP Specified IP Address -
If you know that your ISP does not automatically
transmit your IP address to the router during login, click “
Use the IP Address
specified by ISP
” check box and enter the IP address , which your ISP provided.
¾
Detect Online Interval -
The default value is 0, you can input the value between 0
and 120. The router will detect Access Concentrator online at every interval between
seconds. If the value is 0,
it
means do not detect.
¾
DNS IP Address -
If you know that your ISP does not automatically transmit DNS
addresses to the router during login, click “
Use the following DNS servers
”
checkbox and enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it as well.
Click the
Save
button to save your settings.
4.4.3 MAC Clone
You can configure the MAC address of the WAN port on this page, Figure 4-10:
- 18 -
