TL-R488T
Load Balance Broadband Router User Guide
37
Figure 4-17
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.4.1
DHCP Settings
Choose menu “
DHCP
→
DHCP Settings
”, you can configure the DHCP in the next screen (shown
in Figure 4-18).
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN.
Figure 4-18
¾
DHCP Server -
Enable or disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must manually configure the
computer.
¾
Start IP Address -
This field specifies the first address in the IP address pool. The default
address is 192.168.1.100.
¾
End IP Address -
This field specifies the end address in the IP address pool. The default
address is 192.168.1.199.
¾
Address Lease Time -
This is the amount of time in which a network user will be allowed
connection to the router with their current dynamic IP address. Enter the amount of time (in
minutes), the range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.
