TL-R488T
Load Balance Broadband Router User Guide
43
Step 3:
When necessary, the external host will be able to connect to the local host using one of
the ports defined in the Incoming Ports
field.
To add/modify a port triggering entry:
Step 1:
Click
Add New…
/
Modify
shown in Figure 4-25, you will see a new screen shown in
Step 2:
Select the application you want from the “Common Applications”, then the Trigger port
and Incoming ports will be added to the corresponding field automatically, you only need
to configure the Trigger protocol and Incoming Protocol for the entry; If the “Common
Applications” does not contain the applications that you want, please configure these
options manually.
Figure 4-26
Step 3:
After that, select
Enabled
to make the entry take effect.
Step 4:
Click
Save
button to save the configuration.
)
Note:
1) If you want to add more than one reserved IP, please go to
step 1
to continue.
2) When the trigger connection is released, the according opening ports will be closed.
3) Each rule allowed to be used only by one host on LAN synchronously. The trigger
connection of other hosts on LAN will be refused.
4) Incoming Port Range cannot overlap each other.
Other configurations for the entries as shown in Figure 4-25:
Click the
Delete
button to delete the entry.
Click the
Enable All
button to enable all the entries.
Click the
Disable All
button to disable all the entries.
Click the
Delete All
button to delete all the entries.
Click the
Previous
button to view the information in the previous screen,
click the
Next
button to
