TP-Link TL-R488T, User Manual

Page: 83 / 90

TL-R488T Load Balance Broadband Router User Guide
78
UDP datagram.
¾
Detect Result - The interval between sending datagram and recving datagram, uint is ms.
4.13.11 IP NAT Table
Choose menu “ System Tools → IP NAT Table ” , you will see the IP NAT in the table as below:
Figure 4-77
¾
Out Link - The WAN port which links the router.
¾
Protocol Type - The protocol which is used in the link.
¾
IP address - The local or remote IP address to be examined.
¾
Show - To examine the information which the local or remote IP address equals that you
input.
¾
Refresh - To get the latest status and settings of the router
¾
Per page - To set how many information entries a page show.
4.13.12 NAT Source Port Settings
Choose menu “ System Tools → NAT Source Port Settings ” , you can configure the rang of
exte-rior port for NAT.
Figure 4-78
Click the Restore button to restore the setting to default value- 1040-65500.