TD-W8910GB
54M Wireless ADSL2+ Router User Guide
27
The information of the figure shows above is same as the information in the Figure 4-3.
4.4.2
LAN
Choose “
Advanced Setup
”
Æ
“
LAN
”, and you will see the LAN screen (shown in Figure 4-14)
，
the
section allows you to configure the Router’s LAN ports settings.
Figure 4-14
¾
IP Address:
You can configure the Router’s IP Address and Subnet Mask for LAN Interface.
IP Address:
Enter the Router’s local IP Address, then you can access to the Web-based
Utility via the IP Address, the default value is 192.168.1.1.
Subnet Mask:
Enter the Router’s Subnet Mask, the default value is 255.255.255.0.
¾
Enable UPnP:
If you need the UPnP function,
select the check box to enable it.
¾
Enable IGMP Snooping:
If you select the option, please choose the IGMP Mode
:
Standard
Mode or Blocking Mode.
