TD-W8910GB
54M Wireless ADSL2+ Router User Guide
23
The information is same as the information in Figure 4-3.
2. PPPoE
If you choose
PPPoE
in the previous screen (shown in Figure 4-5), the configuration is
similar to
PPPoA
, the only difference is that you should set the
PPPoE Service Name
on
the corresponding screen. You can refer to
Chapter 4
to achieve the configuration for the
connection type.
3. MER
If you choose
MER
in the previous screen (shown in Figure 4-5), you can see the screen
(shown in Figure 4-9). Follow the instructions to configure the connection.
Figure 4-9
1) Configure
the
WAN IP Address
. If you are provided a dynamic IP Address, please select
obtain an IP address automatically
, and then the Router will automatically get IP
parameters from your ISP. If you are provided with a static IP Address, please select
Use
the following IP Address
, and then enter the
WAN IP Address
and
WAN Subnet
Mask
.
2) Configure
the
default
gateway
. If you are provided a dynamic gateway address, please
