TD-W8910GB
54M Wireless ADSL2+ Router User Guide
4
Figure 2-2
¾
Line:
Connect to the Modem Port of Splitter or to the telephone line.
¾
Reset Button:
There are two ways to reset the Router's factory defaults.
1) Use
the
Restore Default
function on
Management
->
settings
page in the router's
Web-based Utility.
2) Use the Factory Default Reset button: Press the Reset button for more than five seconds
and then wait for the router to reboot.
¾
1, 2, 3, 4 (LAN):
Through
these ports, you can connect the Router to your PCs and the other
Ethernet network devices.
¾
Power:
The Power plug is where you will connect the power adapter.
¾
Antenna:
Used for wireless operation and data transmit.
2.4 System Requirements
¾
Make sure your computer has a Networking Interface Card (wired or wireless) before
connecting the Router to your computer.
¾
An operating system supporting the TCP/IP protocol.
¾
Broadband Internet Access (ADSL).
¾
Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later.
2.5 Installation Environment Requirements
¾
The Router should not be located where it will be exposed to moisture or excessive heat.
¾
Place the Router in a location where it can be connected to the various devices as well as to a
power source.
¾
Make sure the cables and power cord are placed safely out of the way so they do not create a
tripping hazard.
¾
Designed to go up to 100 meters indoors and up to 300 meters outdoors for wireless
connection.
¾
The Router can be placed on a shelf or desktop.
