TD-W8910GB
54M Wireless ADSL2+ Router User Guide
21
Figure 4-4) to configure them again.
1. PPPoA
If you choose connection type
PPPoA
on the screen above (shown in Figure 4-5),
you will
see the screen below (shown in Figure 4-6). Follow the instructions to configure the WAN
Interface.
Figure 4-6
1) Enter
the
PPP Username
and
PPP Password
provided by your ISP exactly, select the
Authentication Method
in the drop-down list, the default method is
AUTO
, you can
leave it as a default setting.
2) If you wish to activate the “Connect on Demand” function, click the
Dial on the demand
radio-button, and enter the
Inactivity timeout
value, the range is from 1 to 4320 minutes.
Then the Router will cut off the Internet connection after it has been inactive for a specific
period of time (Inactivity Timeout). If your Internet connection is terminated due to
inactivity, Connect on Demand enables the Router to automatically re-establish your
connection as soon as you attempt to access the Internet again.
3) If you are required to use a permanent IP address, select the option
Static IP Address
and enter the value in the text box.
4) Click
the
Next
button to go to the next screen below (shown in Figure 4-7), or else click
the
Back
button to return to the previous screen to make modifications.
