TD-W8910GB
54M Wireless ADSL2+ Router User Guide
38
Figure 4-26
Setup an Incoming IP Filtering rule:
1. Click
the
Add
button (pop-up Figure 4-26), and then you will set the new rule in the next
screen (shown in Figure 4-27).
Figure 4-27
2. Enter
the
Filter name
for the rule, it is exclusive and must be filled in.
3. Select
Protocol
in the drop-down list, enter
Source IP address
,
Source Subnet Mask
,
Source Port
,
Destination IP address
,
Destination Subnet Mask
, and
Destination Port
for
the rule.
4. Select at least one WAN interfaces displayed below to apply this rule.
5. Click
the
Save/Apply
button to save this entry.
)
Note:
When you add a
Incoming IP Filtering entry, you must configure at least one condition on the
screen above except the Filter name. If you leave
Protocol
blank, it means that the rule is
effective to all protocols, if you leave the Source IP address and/or Destination IP address blank, it
