02
Redundant Power Supply
Indicators
You can monitor the running status of RPS150 through the Power and FAN LEDs.
LED
Status
Indication
Power
On
The system power supply is normal
Flashing
The system power supply is abnormal
Off
The system power supply is off or abnormal
FAN
On
The fan works normally
Flashing
The fan works abnormally
Off
The power supply is off or the fan works
abnormally
Rear Panel of RPS150
■
The rear panel of RPS150 is shown as the following figure.
AC Power Input
Grounding Terminal
Protective Cover
Rear Panel of RPS150
Figure 1-2
AC Power Input
On the right side of the rear panel, and the input AC power should be 100-240V~
50/60Hz.
Grounding Terminal
On the left side of the AC Power Input, please ground the device with the provided
Ground Cable. You can also ground the device through the PE (Protecting Earth1
cable of AC cord. For detailed information, please refer to section
3.1 Connect to
Ground
.
Protective Cover
It is used to protect the DC Power Output Socket. Remove it to connect RPS150 to
the powered device.
Caution:
Please use the provided power cord and verify the power supply is 100-240V~50/60Hz.
■
The electrical outlet shall be installed near the device and shall be easily accessible.
■
Introduction
