11
Redundant Power Supply
Connection
Power On
111
The RPS150 requires 100-240V~50/60HZ AC power input.
Confirm that the power supply satisfies the requirement of the input voltage of
1.
RPS150;
Plug the negative connector of the provided AC power cord into the power socket
2.
of RPS150, and the positive connector into a power outlet as the following figure
shown. After RPS150 is powered on normally, the Power LED and FAN LED indicators
on its front panel will light on all the time.
Connecting to Power Supply
Figure 3-4
Caution:
Make sure that the power supply is well grounded. Locate the switch of the power
■
supply in advance, so that you can cut it off in time when needed.
Disconnect
■
RPS150 from its AC power supply when plugging or removing the DC
power cable.
The figure is to illustrate the application and principle. The power cord you get from
■
the package and the socket in your situation will comply with the regulation in your
country, so they may differ from the figure above.
Verify Installation
112
After completing the installation, please verify the following items:
There is enough room around the sides of RPS150 for heat dissipation and the air
■
flow is adequate;
The voltage of the power supply meets the requirement of the input voltage of the
■
device;
The power socket, device and rack are well grounded.
■
