PW-AN401/PW-AN401D
150M Wireless N Access Point User Guide
4
1.4.2 The Rear Panel
Figure 1-2
Viewed from left to right, the following parts are located on the rear panel of
PW-AN401/PW-AN401D.
POWER:
The power port connects to the power adapter provided with the
PW-AN401/PW-AN401D 150M Wireless N Access Point.
ON/OFF:
The switch for the power.
LAN:
One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a router.
RESET:
The Reset button is used to restore the AP’s factory default settings. There are two ways
to reset the Access Point’s factory defaults:
z
Method one:
With the AP powered on, use a pin to press and hold the Reset button (about 5
seconds) until the System LED becomes quick-flash from slow-flash. And then release the
button and wait the AP to reboot to its factory default settings.
z
Method two:
Restore the default settings from “
System Tools
>
Factory Defaults
” of the
AP's Web-based management page.
Wireless antenna:
The external antenna is used to transmit and receive wireless data.
)
Note:
Ensure the AP is powered on before it restarts completely.
