PW-AN401/PW-AN401D
150M Wireless N Access Point User Guide
40
5) Client:
This mode allows the device to act as a wireless station to enable wired host(s) to
access an AP.
Figure 4-14 Wireless Settings in Client mode
¾
Wireless Name of Root AP -
If you select the radio button before
Wireless Name of Root
AP
, the AP client will connect to the AP according to SSID. Enter the SSID of AP that you
want to access.
¾
MAC Address of Root AP -
If you select the radio button before
MAC Address of Root AP
,
the AP client will connect to the AP according MAC address. Enter the MAC address of AP
that you want to access.
¾
Channel Width
-
Determines the channel width to be used. It is unnecessary to change the
default value unless required.
¾
Enable Wireless Radio -
Select or deselect this check box to allow or deny wireless stations
to access the device.
Click the
Survey
button to detect the SSIDs in the local area.
)
Note:
To apply any settings you have altered on the page, please click the
Save
button, and then you
will be reminded to reboot the device.
4.7.2 Wireless Security
Selecting
Wireless
>
Wireless Security
will enable you to configure wireless security for your
wireless network to protect your data from intruders. The AP provides three security types: WEP,
WPA/WPA2 and WPA-PSK/WPA2-PSK. Wireless security can be set on the following screen
shown as Figure 4-15. The security options are different for different operation mode.
