PW-AN401/PW-AN401D
150M Wireless N Access Point User Guide
32
•
11g only -
Only 802.11g wireless stations can connect to the device.
•
11n only -
Only 802.11n wireless stations can connect to the device.
•
11bg mixed -
Both 802.11b and 802.11g wireless stations can connect to the device.
•
11bgn mixed -
All 802.11b, 802.11g and 802.11n wireless stations can connect to the
device.
¾
Channel Width
-
Determines the channel width to be used. It is unnecessary to change the
default value unless required.
¾
Enable Wireless Radio -
Select or deselect this check box to allow or deny wireless stations
to access the device.
¾
Enable SSID Broadcast
-
Select or deselect this check box to allow or deny the device to
broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the local
area for wireless networks to associate with, they will detect the SSID broadcast by the
device.
)
Note:
To apply any settings you have altered on the page, please click the
Save
button, and then you
will be reminded to reboot the device.
2) Multi-SSID:
This mode allows the device to support up to four SSIDs.
Figure 4-11 Wireless Settings in Multi-SSID mode
¾
Enable VLAN -
Check this box and then you can change the
VLAN ID
of each SSID. If you
want to configure the Guest and Internal networks on VLAN, the switch you are using must
