PW-AN401/PW-AN401D
150M Wireless N Access Point User Guide
56
if you don’t know the DNS value. The factory default setting is 0.0.0.0.
¾
Secondary DNS (optional) -
Enter the IP address of another DNS server if your ISP provides
two DNS servers. The factory default setting is 0.0.0.0.
Click
Save
to save the changes.
)
Note:
1. When the device is working on Dynamic IP mode, the DHCP Server function will be
disabled.
2. To use the DHCP server function of the device, you should configure all computers in the
LAN as "Obtain an IP Address automatically" mode. This function will not take effect until
the device reboots.
4.8.2 DHCP Clients List
Selecting
DHCP
>
DHCP Clients List
will enable you to view the Client Name
,
MAC Address,
Assigned IP
and
Lease Time for each DHCP Client attached to the device (Figure 4-28).
Figure 4-28 DHCP Clients List
¾
ID
-
Here displays the index of the DHCP client.
¾
Client Name -
Here displays the name of the DHCP client.
¾
MAC Address -
Here displays the MAC address of the DHCP client.
¾
Assigned IP -
Here displays the IP address that the AP has allocated to the DHCP client.
¾
Lease Time
-
Here displays the time of the DHCP client leased. Before the time is up, DHCP
client will request to renew the lease automatically.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click on the
Refresh
button.
4.8.3 Address Reservation
Selecting
DHCP
>
Address Reservation
will enable you to specify a reserved IP address for a
PC on the LAN, so the PC will always obtain the same IP address each time when it accesses the
AP. Reserved IP addresses should be assigned to servers that require permanent IP settings. The
screen below is used for address reservation (shown in Figure 4-29).
