PW-AN401/PW-AN401D
150M Wireless N Access Point User Guide
64
)
Note:
1. There is no need to upgrade the firmware unless the new firmware has a new feature you want
to use. However, when experiencing problems caused by the device itself, you can try to
upgrade the firmware.
2. Before upgrading the device’s firmware, you should write down some of your customized
settings to avoid losing important configuration settings of device.
To upgrade the device's firmware, follow these instructions:
1. Download a more recent firmware upgrade file from the website ().
2. Enter the path name or click
Browse…
to select the downloaded file on the computer into the
File
blank.
3. Click
Upgrade
.
)
Note:
Do not turn off the device or press the
Reset
button while the firmware is being upgraded. The
device will reboot after the Upgrading has been finished.
4.9.6 Factory Defaults
Selecting
System Tools
>
Factory Default
allows you to restore the factory default settings for
the device on the screen shown in Figure 4-37.
Figure 4-37 Restore Factory Defaults
Click
Restore
to reset all configuration settings to their default values.
•
Default
User Name
: admin
•
Default
Password
: admin
•
Default
IP Address
: 192.168.0.254
•
Default
Subnet Mask
: 255.255.255.0
)
Note:
Any settings you have saved will be lost when the default settings are restored.
4.9.7 Backup & Restore
Selecting
System Tools
>
Backup & Restore
allows you to save all configuration settings to your
local computer as a file or restore the device's configuration on the screen shown in Figure 4-38.
