53
3.1
Monitor the EAP
To monitor the EAP information, go to the
Status
>
Device
page.
The following device information is displayed:
Device Name
Displays the name of the EAP. The name consists of the product model
followed with the MAC address of the EAP by default.
Device Model
Displays the product model of the EAP.
Firmware Version
Displays the current firmware version the EAP. To update the firmware,
you can refer to
Update the Firmware
.
Hardware Version
Displays the hardware version the EAP.
MAC Address
Displays the MAC address of the EAP.
IP Address
Displays the IP address of the EAP.
Subnet Mask
Displays the subnet mask of the EAP.
System Time
Displays the current system time. To configure the system time, you can
refer to
Configure the System Time
.
Uptime
Displays how long the EAP has been working since it starts up.
