41
3. In the
Scheduler Association
section, configure the scheduler rule. There are two
association modes:
Association with SSID
and
Association with AP
. The following
sections introduce how to configure each mode.
■
Association with SSID
If you select
Association with SSID
in step 1, the Scheduler Association table will
display all the SSIDs on the EAP. For each SSID, you can select a profile in the
Profile
Name
column and select the scheduler rule
(Radio On/Radio Off)
in the
Action
column.
Then click
Save
.
For example, the following configuration means that during the time range defined in
Profile2, the radio of SSID
SSID-1
is on and the radio of SSID
SSID-2
is off.
■
Association with AP
If you select
Association with AP
in step 1, the Scheduler Association table will display
the name and MAC address of the EAP. Select a profile in the
Profile Name
column and
select the scheduler rule
(Radio On/Radio Off)
in the
Action
column. Then click
Save
.
For example, the following configuration means that during the time range defined in
Profile2, the radio of all SSIDs on the EAP is on.
2.6
Configure Band Steering
A client device that is capable of communicating on both the 2.4GHz and 5GHz frequency
bands will typically connect to the 2.4GHz band. However, if too many client devices
are connected to an EAP on the 2.4GHz band, the efficiency of communication will be
