78
Configure the Way of Receiving Logs
In the
Log Settings
section, you can configure the ways of receiving system logs.
Follow the steps below to configure this feature:
1. Check the corresponding box to enable one or more ways of receiving system logs,
and configure the related parameters. Two ways are available:
and
.
■
Auto Mail
If Auto Mail is configured, system logs will be sent to a specified mailbox. Check the box
to enable the feature and configure the related parameters.
Ntte
SSL encryption is not currently supported.
The following table introduces how to configure these parameters:
From
Enter the sender’s E-mail address.
To
Enter the receiver’s E-mail address.
SMTP Server
Enter the IP address of the sender’s SMTP server.
Note:
At present, the domain name of SMTP server is not supported in
this field.
Enable
Authentication
If the sender’s mailbox is configured with You can check the box to
enable mail server authentication. Enter the sender’s username and
password.
