background image

JetStream L2/L2+ Managed Switch

13

Installation

Keep the equipment room at an appropriate level of temperature and humidity. Too much or too 

little humidity may lead to bad insulation, leakage of electricity, mechanical property changes, 

and corrosion. High temperatures may accelerate aging of the insulation materials, significantly 

shortening the service life of the device. To find out the best temperature and humidity conditions 

for the device, check the Appendix B Specifications.

Clearness

The dust accumulated on the switch can be absorbed by static electricity and result in poor contact 

of metal contact points. Some measures have been taken for the device to prevent static electricity, 

but too strong static electricity can cause deadly damage to the electronic elements on the internal 

circuit board. To avoid the effect of static electricity on the operation of the switch, attach much 

importance to the following items:

 

Dust the device regularly, and keep the indoor air clean.

 

Keep the device well grounded and ensure that the static electricity has been transferred.

Electromagnetic Interference

Electronic elements including capacitance and inductance on the device can be affected by external 

interferences, such as conducted emission by capacitance coupling, inductance coupling, and 

impedance coupling. To decrease the interferences, make sure to take the following measures:

 

Use the power supply that can effectively filter interference from the power grid.

 

Keep the device far from high-frequency and strong-current devices such as radio transmitting 

station.

 

Use electromagnetic shielding when necessary.

Lightning Protection

Extremely high voltage currents can be produced instantly when lightning occurs and the air in the 

electric discharge path can be instantly heated up to 20,000 °C. As this instant current is strong 

enough to damage electronic devices, more effective lightning protection measures should be 

taken.

 

Ensure that the rack and the device are well earthed.

 

Make sure the power socket has a good contact with the ground.

Summary of Contents for JetStream L2 Lite TL-SG3210

































Reviews: