JetStream L2/L2+ Managed Switch
05
Introduction
For TL-SX3008F
LED
Indication
PWR
On
: The switch is powered on.
Off
: The switch is powered off or power supply is abnormal.
Flashing
: Power supply is abnormal.
SYS
Flashing
: The switch works properly.
On or Off
: The switch works improperly.
Port 1
–
8
Green On
: Running at 10 Gbps, but no activity.
Green Flashing
: Running at 10 Gbps and transmitting or receiving data.
Yellow On
: Running at 1 Gbps, but no activity.
Yellow Flashing
: Running at 1 Gbps and transmitting or receiving data.
Off
: No device is linked to the corresponding port.
For TL-SX3016F
PWR1*
PWR2
Indication
Green On
Off
The switch is powered by PWR1.
PWR2 is disconnected or it works improperly.
Green On
Yellow On**
The switch is powered by PWR1.
PWR1 and PWR2 are connected.*
Off
Green On
The switch is powered by PWR2.
PWR1 is disconnected or it works improperly.
Off
Off
The switch is powered off or both PWR1 and PWR2 work
improperly.
LED
Indication
SYS
Flashing
: The switch works properly.
On or Off
: The switch works improperly.
FAN
Green
: All the fans work properly.
Yellow
: Not all the fans work properly.
Port 1
–
16
Green On
: Running at 10 Gbps, but no activity.
Green Flashing
: Running at 10 Gbps and transmitting or receiving data.
Yellow On
: Running at 1 Gbps, but no activity.
Yellow Flashing
: Running at 1 Gbps and transmitting or receiving data.
Off
: No device is linked to the corresponding port.
*PWR1 is the primary power supply and it takes priority over PWR2.
**When both PWR1 and PWR2 work properly and the switch is powerd by PWR1, it takes 10-20 seconds for
the LED PWR2 (yellow) to go out after PWR2 is unplugged.
