84
Chapter 13
Manage Your Router
3.
Enable
Remote Management
and
Remote Management via HTTPS
to allow for
HTTPS connection. Keep the
Port
as the default setting.
4.
Set the client device allowed for remote management. Select
All
to allow all remote
devices to manage the router. If you just want to allow a specific device to manage
the router, select
Only the Following IP/MAC Address
and enter the IP/MAC address
of the remote device.
5.
Click
Save
.
All devices or the specific device on the internet can log in to your router using the
address displayed on the
Manage This Router via the Address
field to manage the
router.
Tips:
1. If you were warned about the certificate when visiting the web management page remotely, click
Trust
(or a
similar option) to continue. To avoid this warning, you can download and install the certificate on the router’s web
management page at
Advanced
>
System Tools
>
Administration
.
2. The router’s WAN IP is usually a dynamic IP. Please refer to
Set Up a Dynamic DNS Service Account
if you want to log
in to the router through a domain name.
13. 5. 4. ICMP Ping
ICMP (Internet Control Message Protocol) Ping is used to diagnose the network by
sending ICMP echo request packets to the target remote or local host and waiting for
an ICMP response.
You can control the router’s replies to ICMP Ping requests.
1.
Visit
http://tplinkwifi.net
, and log in with the password you set for the router.
