TP-Link archer VR900V User Manual Download Page 11

Page: 11 / 141

Chapter 1

Get to Know about Your Modem Router

LED Explanation

Name

Status

Indication

Power

System initialization complete.

Flashing

System initializing or firmware upgrading is in process. Do not

disconnect or power off the modem router.

Off

Power is off. Please ensure that the power adapter is

connected correctly.

VDSL/ADSL

DSL line is synchronized and ready to use.

Flashing

The DSL negotiation is in progress.

Off

DSL synchronization failed. Please refer to Note 1 for

troubleshooting.

Internet

The network is available with a successful Internet connection.

Off

There is no successful Internet connection or the modem

router is operating in Bridge mode. Please refer to Note 2 for

troubleshooting.

Wireless 2.4Ghz

The wireless 2.4GHz band is working properly.

Quick

Flashing

WPS handshaking is in process and will continue for about

2 minutes. Please press the WPS button on other wireless

devices that you want to add to the network while the LED

is flashing.

Off

The wireless 2.4 GHz band is disabled.

Wireless 5Ghz

The wireless 5GHz band is working properly.

Quick

Flashing

WPS handshaking is in process and will continue for about

2 minutes. Please press the WPS button on other wireless

devices that you want to add to the network while the LED

is flashing.

Off

The wireless 5GHz band is disabled.

LAN

At least one LAN port is connected.

Off

No LAN port is connected.

USB

The USB device is identified and ready to use.

Flashing

The USB device is being identified.

Off

No USB device is plugged into the USB port.

Phone

The phone is off-hook or cordless phone is busy.

Flashing

The phone is ringing or cordless phone is registering.

Off

The phone is on-hook.

Summary of Contents for archer VR900V














































































































































Search results

Summary of Contents for archer VR900V

Reviews:

Related manuals for archer VR900V

Brands by name

Popular brands

TP-Link archer VR900V, User Manual

Search results

Summary of Contents for archer VR900V

Reviews:

Related manuals for archer VR900V

Brands by name

Popular brands