TP-Link Archer MR500 User Manual Download Page 83

Page: 83 / 110

Chapter 12

Administrate Your Network

12 11 CWMP Settings

The router offers CWMP feature. The function supports TR-069 protocol which collects
information, diagnoses the devices and configures the devices automatically via ACS
(Auto-Configuration Server).

Visit

http://tplinkmodem.net

, and log in with the password or your TP-Link ID.

Go to

Advanced

System Tools

CWMP Settings

page.

•

Enable CWMP

- Toggle On to enable the CWMP (CPE WAN Management Protocol)

feature.

•

Inform

- Enable this feature to send an Inform message to the ACS (Auto Configuration

Server) periodically.

•

Inform Interval

- Enter the time in seconds when the Inform message will be sent to

the ACS.

•

ACS URL

- Enter the web address of the ACS which is provided by your ISP.

•

ACS Username/Password

- Enter the username/password to log in to the ACS server.

•

Interface used by TR-069 client

- Select which interface to be used by the TR-069

client.

•

Display SOAP messages on serial console

- Toggle to enable or disable this feature.

Summary of Contents for Archer MR500















































































































Search results

Summary of Contents for Archer MR500

Reviews:

Related manuals for Archer MR500

Brands by name

Popular brands

TP-Link Archer MR500, User Manual

Search results

Summary of Contents for Archer MR500

Reviews:

Related manuals for Archer MR500

Brands by name

Popular brands