TP-Link Archer MR500 User Manual Download Page 23

Page: 23 / 110

Chapter 5

QoS

I want to:

Specify priority levels for some devices or applications.

For example,

I have several devices that are connected to my wireless network. I would

like to set an intermediate speed on the internet for my phone.

How can I do that?

Enable QoS and set bandwidth allocation.

1 ) Visit

http://tplinkmodem.net

, and log in with the password or your TP-Link ID.

2 ) Go to

Advanced

QoS

Settings

3 ) Select

Enable QoS

Note:

1. Qos and NAT Boost cannot be enabled at the same time. To disable NAT Boost, go to

Advanced

NAT

Forwarding

NAT Boost

, unclick it and save your settings.

2. NAT Boost ensure that the router has the best throughput. When NAT Boost is enabled, QoS and Traffic

Monitor will be disabled automatically.

4 ) Input the maximum upload and download bandwidth provided by your Internet

service provider. 1Mbps equal s to 1000 Kbps.

5 ) Click

Advanced

and drag the scroll bar to set the bandwidth priority percentage.

6 ) Click

Save

Add a middle priority QoS rule for the phone.

1 ) Click

Add

in the

Middle Priority: 30%

column.

Summary of Contents for Archer MR500















































































































Search results

Summary of Contents for Archer MR500

Reviews:

Related manuals for Archer MR500

Brands by name

Popular brands

TP-Link Archer MR500, User Manual

Search results

Summary of Contents for Archer MR500

Reviews:

Related manuals for Archer MR500

Brands by name

Popular brands