55
Chapter 11
Specify Your Network Settings
4
Enter the client device’s PIN in the field, then click
Connect
.
5
Connect successfully
will appear on the above screen, which means the client
device has successfully connected to the router.
Method 3 Enter the router’s PIN on your client device
Use this method if your client device asks for the router’s PIN.
1
Visit
, and log in with the password or your TP-Link ID.
2
Go to
Advanced
>
Wireless
>
WPS
page.
3
Take a note of the Current PIN of the router. You can also click the
Generate
button
to get a new PIN.
4
On the client device, enter the router’s PIN. (The default PIN is also labeled on the
bottom of the router.)
5
The Wi-Fi LED flashes for about two minutes during the WPS process.
6
When the Wi-Fi LED is on, the client device has successfully connected to the
router.
Note:
1. The Wi-Fi LED on the router will light on for no more than five minutes if the device has been successfully added to
the network.
2. The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuring the WPS.
11 5 3 Schedule Your Wireless Function
You can automatically turn off your wireless network at time when you do not need the
wireless connection.
1
Visit
, and log in with the password or your TP-Link ID.
2
Go to
Advanced
>
Wireless
>
Wireless Schedule
page.
3
Toggle on the button to enable the Wireless Schedule feature.
