84
1
Visit
http://tplinkmodem.net
, and log in with password you set for the router.
2
Configure the
LAN IP address
of the router in the same subnet as the root router.
For example, if the IP address of the root router is 192.168.0.1, the IP address of the
extended router should be from 192.168.0.2 to 192.168.0.254.).
3
Go to
Advanced
>
Wireless
>
Advanced Settings
page and locate the
WDS
section.
4
Select the wireless network 2.4GHz or 5GHz appropriate to your needs and select
the checkbox to enable the
WDS Bridging
function.
5
Click
Survey
to scan all the AP devices and choose the root AP to be bridged.
6
Click the connect icon and then the SSID and MAC will be auto-populated. Configure
the Security settings as the AP you choose to be bridged.
Summary of Contents for ARCHER MR200
Page 1: ...REV1 1 1 1910011775 Archer MR200 User Guide AC750 Wireless Dual Band 4G LTE Router ...
Page 15: ...11 Chapter 2 Connect the Hardware ...
Page 16: ...Chapter 3 Log into Your 4G LTE Router ...
Page 25: ...21 Chapter 5 Bandwidth Control Now you and your roommate have an independent bandwidth Done ...
