47
Chapter 11
Specify Your Network Settings
11 2 Data Settings
Data Settings is used to monitor the data usage of your router in real-time. You can limit
your data usage according to your monthly allowance or total allowance and you will
receive a warning if your data usage reaches the specified level.
Follow the steps below to monitor your data usage.
1
Visit
http://tplinkmodem.net
, and log in with the password you set for the router.
2
Go to
Advanced
>
Network
>
Data Settings
page.
3
Enable
Data Limit
to set total/monthly data allowance and usage alert to prevent
data overuse.
4
Enter the allowed amount of total/monthly data in the
Total/Monthly Allowance
field. When data usage exceeds the allowed level, the router will disconnect from
the Internet and notify you on the
Basic
>
Network Map
Page.
5
Enter a percentage in the
Usage Alert
field to prevent data overuse. When data
usage reaches the alert level, a warning will be shown on the
Basic
>
Network Map
Page.
6
Enable
Data Statistics
to reset data statistics when the next billing cycle starts.
7
Enter the start date of the billing cycle in the
Start Date
field.
8
Click
Save
to save the settings.
Summary of Contents for ARCHER MR200
Page 1: ...REV1 1 1 1910011775 Archer MR200 User Guide AC750 Wireless Dual Band 4G LTE Router ...
Page 15: ...11 Chapter 2 Connect the Hardware ...
Page 16: ...Chapter 3 Log into Your 4G LTE Router ...
Page 25: ...21 Chapter 5 Bandwidth Control Now you and your roommate have an independent bandwidth Done ...
