TP-Link ARCHER MR200, User Manual

Page: 62 / 97

58
Chapter 11 Specify Your Network Settings
11 6 Create Static Routes
A static route is a pre-determined path that network information must travel to reach
a specific host or network. Data from one point to another will always follow the same
path regardless of other considerations. Normal Internet usage does not require this
setting to be configured.
Visit multiple networks and multiple servers at the same time.
For example , in a small office, my PC can surf the Internet, but I
also want to visit my company’s server. Now I have a switch and
another router. I connect the devices as shown in the following
figure so that the physical connection between my PC and my
company’s server is achieved. To surf the Internet and visit my
company’s network at the same time, I need to configure the
static routing.
Company’s server
My PC
Router 2
4G LTE router
Switch
LAN: 192.168.1.1
192.168.1.100
LAN: 192.168.1.2
WAN: 172.30.30.100
172.30.30.1
1 Make sure the routers use different LAN IP addresses on the
same subnet. Disable Router 2’s DHCP function.
2 Visit http://tplinkmodem.net , and log in with the password
you set for the router.
3 Go to Advanced > Network > Advanced Routing . Select your
current WAN Interface and click Save .
I want to:
How can I
do that?