TP-Link Archer C55 User Manual Download Page 31

Page: 31 / 124

Archer C55

AC1200 Wireless Dual Band Gigabit Router

- 26 -



Gateway -

(Optional) Enter the gateway IP address in dotted-decimal notation provided by

your ISP.



Primary DNS Server/Secondary DNS Server-

(Optional) Enter one or two DNS addresses

in dotted-decimal notation provided by your ISP.



MTU (Bytes) -

The normal

MTU

(Maximum Transmission Unit) value for most Ethernet

networks is 1500 Bytes. It is not recommended that you change the default

MTU

size unless

required by your ISP.



Enable IGMP Proxy

IGMP (Internet Group Management Protocol) is used to manage

multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration for
client devices, such as the modem router. The default value is enabled, and if you are not
sure, please contact your ISP or just leave it.

Click the

Save

button to save your settings.

If your ISP provides a PPPoE connection, select

PPPoE

option. And you should enter the

following parameters as follows:



Username/Password -

Enter the User Name and Password provided by your ISP. These

fields are case-sensitive.

Summary of Contents for Archer C55





























































































































Search results

Summary of Contents for Archer C55

Reviews:

Related manuals for Archer C55

Brands by name

Popular brands

TP-Link Archer C55, User Manual

Search results

Summary of Contents for Archer C55

Reviews:

Related manuals for Archer C55

Brands by name

Popular brands