Archer C55
AC1200 Wireless Dual Band Gigabit Router
- 36 -
4.6.1
Basic Settings
Choose menu “
Wireless 2.4GHz
→
Basic Settings
”, you can configure the basic settings for
the wireless network of 2.4GHz on this page.
Wireless Network Name -
Also called the SSID (Service Set Identification). Enter a value of
up to 32 characters. The same name must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
TP-LINK_XXXX. This value is case-sensitive. For example,
TEST
is NOT the same as
test
.
Mode -
Select the desired mode.
11bg mixed -
Select if you are using both 802.11b and 802.11g wireless clients.
11bgn mixed -
Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. It
is strongly recommended that you set the Mode to
802.11bgn mixed
, and all of
802.11b, 802.11g, and 802.11n wireless stations can connect to the router.
Channel -
This field determines which operating frequency will be used. The default channel
is set to
Auto
, so the AP will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
