TP-Link Archer C55 User Manual Download Page 66

Page: 66 / 124

Archer C55

AC1200 Wireless Dual Band Gigabit Router

- 61 -

4.8 Guest Network

Choose “

Guest Network

”, and you can configure the Guest Network Wireless Settings on the

page as shown in the following figure.



Allow Guest To Access My Local Network

- If enabled, guests can communicate with

hosts.



Guest Network Isolation

-. If enabled, guests are isolated from each other.



Guest Network Bandwidth Control

- If enabled, the Guest Network Bandwidth Control rules

will take effect.



Band Select/Guest Network

– Select the wireless network band (2.4G/5G) and enabled or

disable its Guest Network function.



Network Name

- Enter a value of up to 32 characters. The same Name (SSID) must be

assigned to all wireless devices in your Guest Network.

Summary of Contents for Archer C55





























































































































Search results

Summary of Contents for Archer C55

Reviews:

Related manuals for Archer C55

Brands by name

Popular brands

TP-Link Archer C55, User Manual

Search results

Summary of Contents for Archer C55

Reviews:

Related manuals for Archer C55

Brands by name

Popular brands