Archer C55
AC1200 Wireless Dual Band Gigabit Router
- 14 -
User Name
/
Password -
Enter the
User Name
and
Password
provided by your ISP.
These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Confirm Password -
Enter the password again to make sure that the password is
correct.
Secondary Connection -
It’s available only for PPPoE Connection. If your ISP provides an
extra Connection type such as Dynamic/Static IP to connect to a local area network, then you
can check the radio button of Dynamic/Static IP to activate this secondary connection.
Disabled
-
The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.
Dynamic IP
-
You can check this radio button to use Dynamic IP as the secondary
connection to connect to the local area network provided by ISP.
Static IP
-
You can check this radio button to use Static IP as the secondary connection
to connect to the local area network provided by ISP.
4) If your connection type is
L2TP
, select L2TP and the next screen will appear as shown in
the following figure.Configure the following parameters and then click
Next
to continue.
Username
/
Password -
Enter the
Username
and
Password
provided by your ISP.
These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Select
Static IP
if the IP Address/ Subnet Mask/ Gateway and DNS server address have
been provided by your ISP. Then please enter server IP address or domain name provided by
your ISP, and also enter the corresponding parameters.
