TP-Link Archer C55 User Manual Download Page 37

Page: 37 / 124

Archer C55

AC1200 Wireless Dual Band Gigabit Router

- 32 -



Username/Password -

Enter the User Name and Password provided by your ISP. These

fields are case-sensitive.



Dynamic IP/ Static IP -

Choose the addressing type given by your ISP, either Dynamic IP or

Static IP, and enter the ISP’s IP address or the domain name.

If you choose static IP and enter the domain name, you should also enter the DNS assigned
by your ISP. And click the

Save

button.

Click the

Connect

button to connect immediately. Click the

Disconnect

button to disconnect

immediately.



MTU(Bytes)

The default MTU size is “1420” bytes, which is usually fine. It is not

recommended that you change the default

MTU Size

unless required by your ISP.



Enable IGMP Proxy

IGMP (Internet Group Management Protocol) is used to manage

multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration for
client devices, such as the modem router. The default value is enabled, and if you are not
sure, please contact your ISP or just leave it.



Always on -

In this mode, the Internet connection will be active all the time.

Summary of Contents for Archer C55





























































































































Search results

Summary of Contents for Archer C55

Reviews:

Related manuals for Archer C55

Brands by name

Popular brands

TP-Link Archer C55, User Manual

Search results

Summary of Contents for Archer C55

Reviews:

Related manuals for Archer C55

Brands by name

Popular brands