Toyota Sienna 2003 Owner'S Manual Download Page 218

Page: 218 / 340

03 SIENNA_U (L/O 0207)

214

2003 MY SIENNA (OM45410U)

CAUTION

To reduce the chance of injury in
case of an accident or a sudden

stop, always keep the garage door

opener box closed while driving.

Keep the remaining spacers away

from children.

The auxiliary box and garage door

opener  box  (stored  in  the  glove  box)
are  interchangeable.
Removing  the  cover—

Half open the cover. Pinch each hinge and

pull it out of its pivot one at a time as

shown above.
Do not remove the cover forcibly.

Installing the cover—

Align  the  hinges  to  the  pivots,  and  press
each  hinge  until  you  hear  a  click.
Make  sure  that  the  cover  opens  and
closes  smoothly.

Summary of Contents for Sienna 2003





















































































































































































































































































































































Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands

Toyota Sienna 2003, Owner'S Manual

Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands