Toyota Sienna 2003 Owner'S Manual Download Page 64

Page: 64 / 340

03 SIENNA_U (L/O 0207)

2003 MY SIENNA (OM45410U)

BEFORE  REMOVING  THIRD  SEAT
Stow  the  third  center  seat  belt  as
shown  in  the  illustration.

This prevents the belt from falling out
when you remove the third seat.

NOTICE

The third center seat belt must be
stowed before you remove the third

seat.

Make sure to stow the third center
seat belt in order not to cause dam-

age on the seat belt by pinching it

between the third seat inner leg and
seat striker.

REMOVING THIRD SEAT

1. Lower the head restraint to the low-

est position.

—Removing third seats

Summary of Contents for Sienna 2003





















































































































































































































































































































































Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands

Toyota Sienna 2003, Owner'S Manual

Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands