Toyota Sienna 2003 Owner'S Manual Download Page 131

Page: 131 / 340

03 SIENNA_U (L/O 0207)

127

2003 MY SIENNA (OM45410U)

To turn on the emergency flashers,

push the switch.

All the turn signal lights will flash. To turn

them off, push the switch once again.
Turn on the emergency flashers to warn

other drivers if your vehicle must be

stopped where it might be a traffic hazard.
Always pull as far off the road as pos-

sible.
The turn signal light switch will not work

when the emergency flashers are operat-

ing.

NOTICE

To prevent the battery from being dis-
charged, do not leave the switch on

longer than necessary when the en-

gine is not running.

To adjust the brightness of the instru-

ment panel lights, turn the dial.

Emergency flashers

Instrument panel light control

Summary of Contents for Sienna 2003





















































































































































































































































































































































Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands

Toyota Sienna 2003, Owner'S Manual

Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands