Toyota Sienna 2003 Owner'S Manual Download Page 42

Page: 42 / 340

03 SIENNA_U (L/O 0207)

2003 MY SIENNA (OM45410U)

With tachometer

Without tachometer

This indicates that the fuel filler door

is on the left side of your vehicle.

1. To open the fuel filler door, pull the

lever up.
When refueling, turn off the engine.

CAUTION

Do not smoke, cause sparks or al-
low open flames when refueling.

The fumes are flammable.

When opening the cap, do not re-
move the cap quickly. In hot weath-

er, fuel under pressure could cause

injury by spraying out of the filler
neck if the cap is suddenly re-

moved.

Fuel tank cap

Summary of Contents for Sienna 2003





















































































































































































































































































































































Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands

Toyota Sienna 2003, Owner'S Manual

Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands