Toyota Sienna 2003 Owner'S Manual Download Page 65

Page: 65 / 340

03 SIENNA_U (L/O 0207)

2003 MY SIENNA (OM45410U)

2. Slide the seat to the rear

−

most posi-

tion.

3. Lift the seatback angle adjusting le-

ver (1) or press the lever (2) behind
the seatback and fold the seatback

down.

4. Pull the center handle (1) up while

holding up the left side lever (2) un-
der the seat, lift the seat and remove

it toward you.

Removing the third seat will enlarge the

luggage compartment. See “Luggage stow-

age precautions” in Section 2 for precau-
tions in loading luggage.

Summary of Contents for Sienna 2003





















































































































































































































































































































































Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands

Toyota Sienna 2003, Owner'S Manual

Search results

Summary of Contents for Sienna 2003

Reviews:

Related manuals for Sienna 2003

Brands by name

Popular brands