Toyota Sequoia guide, Manual

Page: 450 / 566

450
7-2. Steps to take in an emergency
SEQUOIA_OM_USA_OM0C011U
PCS warning light
When the warning light flashes:
Indicates a malfunction in the PCS (Pre-Collision Sys-
tem)
→
Have the vehicle inspected by your Toyota dealer
immediately.
When the warning light illuminates:
Indicates that the PCS (Pre-Collision System) is tem-
porarily unavailable, possibly due to either of the fol-
lowing:
• An area around the radar sensor or camera sensor
being dirty or covered with condensation, ice, stick-
ers, etc.
→
Clear the dirt, condensation, ice, stickers, etc.
(
→
P. 248, 464)
• Radar sensor or camera sensor operational condi-
tions (such as temperature, etc.) being not met
→
Driving is possible in this case. The PCS (Pre-Col-
lision System) will be enabled if the operational
conditions (such as temperature, etc.) are met
again.
• Either the VSC (Vehicle Stability Control) system or
PCS (Pre-Collision System) is disabled or both are
disabled.
→
To enable the PCS, enable both the VSC system
and PCS. (
→
P. 239, 305)
(Yellow)
LDA (Lane Departure Alert) indicator
* 1
The indicator comes on and a warning message is dis-
played to indicate that the LDA (Lane Departure Alert)
system is not available temporarily or has detected a
malfunction.
→
P. 457
Low fuel level warning light
Indicates remaining fuel is approximately 4.0 gal.
(15 L, 3.3 Imp.gal.) or less
→
Refuel the vehicle.
Warning light Warning light/Details/Actions