Toyota Sequoia guide Page 498 Manual Download

Page: 498 / 566

498

8-1. Specifications

SEQUOIA_OM_USA_OM0C011U

Cooling system

Capacity



Vehicles without towing package

13.1 qt. (12.4 L, 10.9 Imp.qt.)



Vehicles with towing package

14.1 qt. (13.3 L, 11.7 Imp.qt.)

Coolant type

Use either of the following:

• “Toyota Super Long Life Coolant”
• A similar high-quality ethylene glycol-

based non-silicate, non-amine, non-
nitrite, and non-borate coolant with
long-life hybrid organic acid technol-
ogy

Do not use plain water alone.

Ignition system

Spark plug

Make
Gap

DENSO SK20HR11
0.043 in. (1.1 mm)

NOTICE

■

Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.

Electrical system

Battery

Open voltage at
68 °F (20 °C):

12.6

⎯

12.8 V Fully charged

12.2

⎯

12.4 V Half charged

11.8

⎯

12.0 V Discharged

(Voltage checked 20 minutes after the
engine and all the lights are turned off.)

Charging rates

5 A max.

Summary of Contents for Sequoia guide























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sequoia guide

Reviews:

Related manuals for Sequoia guide

Brands by name

Popular brands

Toyota Sequoia guide, Manual

Search results

Summary of Contents for Sequoia guide

Reviews:

Related manuals for Sequoia guide

Brands by name

Popular brands