Toyota Sequoia guide, Manual

Page: 407 / 566

407
6-3. Do-it-yourself maintenance
6
Mainten
ance an
d ca
re
SEQUOIA_OM_USA_OM0C011U
◆
Initializing the tire pressure warning system
■
The tire pressure warning system must be initialized in the fol-
lowing circumstances:
●
When rotating the tires.
●
When the tire inflation pressure is changed such as when chang-
ing tire size. (When there are multiple specified pressures)
●
After registering the ID codes. (
→
P. 408)
When the tire pressure warning system is initialized, the current tire
inflation pressure is set as the benchmark pressure.
■
How to initialize the tire pressure warning system
Park the vehicle in safe place and turn the engine switch off.
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (
→
P. 501)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
Turn the engine switch to the “ON” position.
Push and hold the tire pres-
sure warning reset switch
until the tire pressure warn-
ing light blinks 3 times.
A message is displayed on the
multi-information display. Also,
“- -” is displayed for inflation
pressure of each tire on the
multi-information display while
the tire pressure warning sys-
tem determines the position.
1
2
3
4