Toyota Sequoia guide Manual Download Page 334

Page: 334 / 566

334

5-1. Using the air conditioning system and defogger

SEQUOIA_OM_USA_OM0C011U

■

Rear seat (vehicles with rear console box)

High heating temperature

The indicator (yellow) comes
on.
Press lightly on the opposite
side to turn off.

Low heating temperature

The indicator (green) comes
on.
Press lightly on the opposite
side to turn off.

■

The seat heaters/seat ventilators can be used when

The engine switch is in the “ON” position.

Summary of Contents for Sequoia guide























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sequoia guide

Reviews:

Toyota Sequoia guide, Manual, Page: 334 / 566

Search results

Summary of Contents for Sequoia guide

Reviews: