Toyota Sequoia guide Manual Download Page 223

Page: 223 / 566

223

4-3. Operating the lights and wipers

Drivin

SEQUOIA_OM_USA_OM0C011U



Type B

Intermittent window
wiper operation

Normal window wiper
operation

Washer/wiper dual oper-
ation

The wiper will automatically
operate a couple of times after
the washer squirts.

(After operating several times,
the wiper operates one more
time after a short delay to pre-
vent dripping.)

■

The rear window wiper and washer can be operated when

●

The engine switch is in the “ON” position.

●

The back window is completely closed.

■

If no washer fluid sprays

Check that the washer nozzle is not blocked if there is washer fluid in the
washer fluid reservoir.

■

Customization

Settings (e.g. washer linkage wiper control) can be changed.
(Customizable features

→

P. 520)

Summary of Contents for Sequoia guide























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sequoia guide

Reviews:

Toyota Sequoia guide, Manual, Page: 223 / 566

Search results

Summary of Contents for Sequoia guide

Reviews: