Toyota Sequoia guide, Manual

Page: 263 / 566

263
4-5. Using the driving support systems
4
Drivin
g
SEQUOIA_OM_USA_OM0C011U
To change the set speed, operate the lever until the desired set speed
is displayed.
Increases the speed
Decreases the speed
Fine adjustment: Momentarily
move the lever in the desired
direction.
Large adjustment: Hold the lever
up or down to change the speed,
and release when the desired
speed is reached.
In the vehicle-to-vehicle distance control mode, the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
* 1
or 1 km/h (0.6 mph)
* 2
each time
the lever is operated
 For the U.S. mainland, Hawaii
Large adjustment: Increases or decreases in 1 mph (1.6 km/h)
* 1
or 1 km/h
(0.6 mph)
* 2
increments for as long as the lever is held
 For Canada, Guam, Saipan, A. Samoa and Puerto Rico
Large adjustment: Increases or decreases in 5 mph (8 km/h)
* 1
or 5 km/h
(3.1 mph)
* 2
increments for as long as the lever is held
In the constant speed control mode (
→
P. 266), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
* 1
or 1 km/h (0.6 mph)
* 2
each time
the lever is operated
Large adjustment: The speed will continue to change while the lever is
held.
* 1
: When the set speed is shown in “MPH”
* 2
: When the set speed is shown in “km/h”
Adjusting the set speed