TOYOTA
COROLLA
2010–
TVIP V4
PROCEDURE
REMOTE ENGINE STARTER (RES)
Page 43 of 46
Issue: A 03/12/10
17) Complete the Installation.
Finish reassembling the
a)
Vehicle.
VERIFY:
That panels fit together
properly, with no uneven gaps.
VERIFY:
That all Connectors are
plugged in.
Position the Negative Battery
b)
Cable at the original factory
position.
Tighten the Nut to 36 in•lbf
•
(4.07 N•m)
CAUTION:
Do not touch the
positive terminal.
Clean up and Remove trash.
c)
Sealed in its protective bag,
d)
place the Owner’s Manual in
the Glovebox.
Reset the Power Windows.
e)
Turn the ignition “ON.”
•
Lower the Windows halfway.
•
Pull up on the Power Window
•
Switches until the windows close.
Continue to hold up on the
•
switches for a minimum of 1
Second.
Reset the Moon Roof
f)
(if equipped).
Turn the ignition “ON.”
•
Open the Moon Roof halfway.
•
Push and hold the Moon Roof
•
Switch to close until the Moon
Roof closes.
Continue to hold the switch for a
•
minimum of 1 Second.
Torque Wrench
Fig. 17-2
Fig. 17-1
