TOYOTA
COROLLA
2010–
TVIP V4
PROCEDURE
REMOTE ENGINE STARTER (RES)
Page 32 of 46
Issue: A 03/12/10
Secure the 13P Connectors
k)
to the Vehicle Harness with
1 Wire Tie.
Secure the
l)
1P Male RES
Diagnostic Connector and the
V4 Harness to the Vehicle
Harness with 1 Wire Tie.
NOTE:
Do not secure Female
Connector or its wire.
13) Registration Preparation.
Reassemble the Vehicle.
a)
Note:
Make sure that all
Connectors are reconnected.
Note:
Verify that panels fit
together properly, with no
uneven gaps.
Verify that the Short Pin is
b)
Installed.
If not Install now.
•
10mm Socket, Phillips Screwdriver
Fig. 13-1
Do Not Install
